News Center-Kunshan JER Electronic Technology Co., Ltd._the2page

Site Search

欢迎来到祥云平台DEMO演示官网！

Site map | RSS | XML

关键字一

What maintenance methods do you know about metal molds?

Metal molds are used in industrial production, using various presses and special equipment mounted on the presses to make metal raw materials into required form...

12-21 2021
What are the major processes of metal molds?

The manufacture of metal molds generally goes through several processes such as forging, cutting, and heat treatment. Several major technological properties of ...

12-21 2021
Reasons for damage to metal molds

Metal stamping die is an indispensable and important equipment for making metal stamping parts, so the quality of the die has a great influence on the quality o...

12-21 2021
Hardware mold convex and concave mold protection method

Hardware mold convex and concave mold protection method:The protruding die is called a punch, and the concave die is called a concave die. Because a set of mol...

12-21 2021
Three requirements for selecting metal mold materials

When choosing hardware mold materials, experts suggest that the focus should be on whether it can meet the following three requirements:(1) The mold meets the e...

12-21 2021
Reasons for stamping and bursting of metal molds

It is a very common situation that the stamping template of the metal mold bursts, but when it is serious, a template is divided into several pieces at once. O...

12-21 2021
How to properly use and maintain metal molds?

Since the reform and opening up, with the rapid development of the national economy, the Dongguan hardware mold industry has continuously increased the market d...

12-21 2021
What are the classifications of metal stamping dies?

There are many varieties of metal molds, and we can classify them according to their different properties, so as to better understand the metal molds. Let's...

12-21 2021
What are the working conditions required for stamping parts processing?

1. Wear resistanceWhen the blank in the stamping cavity is plastic, the surface of the cavity is both lively and slippery, resulting in a sharp conflict between...

12-21 2021
Several problems that are easily overlooked in the processing of metal molds

Stamping die wire drawing machine is very simple. The standard equipment on the market is the carrier of the mold. There are differences in the size of hot stam...

12-21 2021

Every page shows 10 Article,Share 30 Article home Previous Page

123

2/3

Next Page last

WeChat public account

WeChat

mobile website

mobile website